High Tech Concrete Co., Ltd.

Quality Assurance

 4.  Admixtures

4.1  Retarder
    4.1.1  Specific gravity test; every drum before using for production

4.2  High range water reducer
    4.2.1  Specific gravity test; every drum before using for production

Admixtures from WR Grace, Singapore are used as major amount for production.  

5.  Concrete

5.1   Fresh concrete test
    5.1.1      Slump test
    5.1.2      Unit weight test
    5.1.3      Temperature

     Every batch of concrete in agitator trucks will be confirmed as being thoroughly mixed before delivering to site. Concrete temperature will be maintained at not more than 30C on site by using chilled water. Initial setting time of concrete depends on the customer requirement. Slump test and taking specimens for concrete strength tests will be the responsible of the concrete Company.

5.2    Sampling or Making test specimen
    5.2.1    Cube or Cylinder; six number per 100 cubic meter or as per customer requirement at site.

5.3    Harden concrete test
    5.3.1    In house compression test is normally made at the age of 3, 7 and 28 days for every 50 cubic meter or as per customer requirement. Summit engineering report which include outline of the project, result summary and strength of concrete member at end of project or as per customer requirement.

5.4    Acceptance of concrete
    5.4.1    No single test strength (the average of the strengths of at least two samples from a batch) shall be more than 500psi below the specified compressive strength.
    5.4.2    The average of any three consecutive test strengths must equal or exceed the specified compressive strength.

6    Calibration

Batching load cells and all testing equipment will be calibrated by external labs or in-house labs at appropriate intervals.

7    Quality Control Record

Trial Mix Report for Design Verification
Trial Mix Report
Compressive Strength of Concrete Specimen
Sieve Analysis
Daily In-house Specimen Pass and Fail Record
In-house Specimen Strength Failure Record
Incoming Quality Check List for Cement
Incoming Quality Check List for Coarse Aggregate
Incoming Quality Check List for Fine Aggregate
Incoming Quality Check List for Chemical Admixture
QC Check List at Plant
QC Check List on Site
Concrete Rebound Hammer Test
Screening Daily Check List and Operating Record
Chemical Admixture Reject Report
Test Record for Measuring Moisture Content of Fine Aggregate (C70-94)
Aggregate Moisture Content
Test Record for Measuring Moisture Content of Fine Aggregate (Oven Method)
Compressive Strength of Concrete Block
Compressive Strength of Cement Mortar Test
Design Input-Output Record
Communication Record for Cement Silo Feeding
Visual Check List For Mixing Water
Process and Product Validation Record

About us

As a market leader in construction materials industry, High Tech Concrete Co., Ltd. manufactures and supplies ready-mixed concrete as well as provides related services to construction sites all over Myanmar.

Read more...

Contact Us

phone

+95 9 798893511, 798893522

           798893532, 798893538

           798893548, 798893558

Email
generalinfo@hightechconcrete.com
salesinfo@hightechconcrete.com
Address No. 1 (B) , Yan Gyi Aung Road, Industrial Zone, Thaketa Township, Yangon , Myanmar